as metal, concrete, polystyrene foam. It is used in furniture and boat
manufacturing and bonding works where water resistance is required.
Technical Features:
Color: Light Brown
Surface Drying Time: 30±5 min
Consumption: Approx. 150 ml/m2
Density: 1,10 ± 0,01 gr/ml
Viskosity: 5.000-10.000 cps 20°C (Spindle No 4, 12 rpm)
Pressing Time: Minimum 2 hours*
Application Temperature: 5°C - 35°C
*Pressing time; It depends on ambient humidity, temperature and
how much porosity of the materials (absorbency) to be glued is.
Type of Usage: Do not use at temperatures below +5°C. The parts to be adhered should be cleaned properly, free of dust and oil. At
least one of the surfaces must be porous for strong adhesion. Slight humidification of surfaces before application will improve adhesion
performance. The adhesive should be applied as a thin layer to one or both surfaces. The surfaces should be pressed within 15 minutes.
Surfaces must remain pressed for at least 2 hours. Newly applied adhesive can be cleaned with acetone
Packaging:
550 gr in original plastic tubes.
ART. NO
800 308 650 MÜLLER MARINE ADHESIVE 550 GR